UNBOX AND SET UP - YOUR GUIDE TO NEW SHOWER UNIT INSTALLATION

Unbox And Set Up - Your Guide To New Shower Unit Installation

Unbox And Set Up - Your Guide To New Shower Unit Installation

Blog Article

Book Today!



This article down below in relation to How to Build a Shower Enclosure for Your DIY Bathroom is quite informative. You should take a look.


How to Install a Freestanding Shower Unit
A successful shower setup needs cautious planning as well as a lot of work. In most cases, you will need to do three types of jobs: mounting walls, mounting the plumbing, and also completing wall surfaces.

Prep work


To start with, you have to decide on the kind of shower that you desire to set up. It is necessary to determine whether the selected shower can coping with specific systems as well as can manage a safe level of water via the boiler. A lot of shower devices nowadays are made to be flexible to various water pressures (such as saved warm water and also cold mains).
It is likewise important to take into consideration the water pressure as well as the preparation of the piping and water drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The tube as well as spray parts of the push-on mixer shower device can be connected to the bathroom faucet based on your requirement, as well as the water temperature can be readjusted through the faucets. Push-on mixers are cheap and also incredibly basic to install. Nevertheless, although the tube link is straightforward, it is easily dislodged. Furthermore, it is troublesome to readjust the temperature.

  • Bath/Shower Mixer: The pipe and spray of this type of shower are integrated with a bath mixer faucet, and the temperature can be changed through the bath faucets. It is a very affordable option as well as no added plumbing is involved. Nevertheless, the bath/shower mixers additionally struggle with troublesome temperature level control options.

  • Handbook Mixer: The tube and spray of a hands-on mixer shower system are a part of the wall device and also the hot and cold water supplies are linked to a solitary shutoff The temperature and pressure of the water are managed via either one or a variety of knobs (in a lot more expensive showers). Although temperature control is much easier in hands-on mixer kinds, they are extra pricey than the formerly mentioned mixers. They likewise call for additional plumbing of hot and cold supply of water pipelines.

  • Thermostatic Mixer: The pipe and spray of this shower type are a part of the wall surface device and the cold and hot water products are attached to a single valve right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to stop it from becoming also warm. Among the biggest advantages of a thermostatic mixer shower kind consists of hassle-free temperature control. Nevertheless, it is one of the most pricey of the various mixer options.

  • Power Shower: A power shower is a single device containing a powerful electric pump that is capable of altering both the water pressure and temperature level. This sort of shower can be fitted if there is water system from a cold water tank and also a warm water cylinder. A power shower makes the change of both stress and also temperature level easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it heats up the water electrically. It is very important to note that for this shower type to be set up, the mains pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature as well as stress to be readjusted using a handle. Versions with temperature stabilisers are better as they remain unaffected by other taps somewhere else being used within the family. A significant drawback of electrical showers is that the control handle just enables the choice of high temperatures at less stress, or reduced temperatures at a better stress. This is problematic in the winter season when the spray is frequently weak and the keys water is colder. However, this trouble is taken on in some models which are readily available with a winter/summer setup.


  • Method


    Relying on the kind of shower you want to mount, the shower head have to either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check valve.
    Prior to beginning, it is recommended to note the placements of the shower head as well as control, and to prepare the pipe-work involved. In addition, the water drainage system to eliminate the waste water will need to be planned. Both placements of the wire path and the shower button will certainly likewise need to be considered if a rapid or electric shower unit is being mounted.
    Utilize the direction overview supplied with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water supply. In order to shield the pipes, they need to be provided a waterproof covering as well as additionally fitted with isolating valves. The pipelines can after that be buried into the wall surface and also glued over to neaten the total appearance.
    Fit the base tray, shower head, and fittings.
    Attach the major shower control to the pipes that will be providing the water (This may call for a women screw thread adapter).
    Reconnect the water system and also test the pipes for any type of leakages, as some might need firm.
    If you are installing an electric shower, bear in mind to switch off the electrical energy supply before making any electric links. Once these links have actually been made (there need to be assistance within the instruction manual), the power supply can be changed back on.

    Changing Water Stress to Match Your Shower


    The cold water reservoir can be raised to a better height (in some cases just 150mm (6inches)) by fitting a strong wood assistance beneath it - possibly composed of struts and blockboards. If you select this choice, the primary as well as distribution pipes will additionally need to be raised to fulfill the new height of the reservoir.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be attached into the power supply in order to operate.

    Piping as well as Drain


    It is best to utilize 15mm size supply pipes, and make the runs to the shower as short and straight as possible so as to preserve optimal stress and also minimise warm loss. In addition, by reducing making use of joints for pipeline edges, you can lower the resistance in the circulation of the water. You can achieve this by bending the pipes instead.

    Most Common Mistakes


  • Going against or overlooking regional code limitations.

  • Utilizing pipes that are also tiny.

  • Connecting copper to galvanized without making use of a brass or dielectric suitable in between the two.

  • Not using tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not setting up an air gap loading for components.

  • Cutting supply stub outs also brief to set up the shutoff valves onto after the completed wall is in place.

  • Not properly aligning tubes right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leakage.).

  • When transforming the water back on in your house, always run the outdoors tube shutoff or flush your commodes to bleed dust and also air from the lines. This particles can trigger problems in your sink taps and also various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    We were introduced to that editorial on How to Install a Freestand from a friend on our other domain. Are you aware of another person who is fascinated by the niche? Feel free to share it. I enjoy reading our article about How to Install a One-Piece Shower Unit.




    Get Estimate


    Report this page